US – update until 2016-03

Above you’ll find another update on the oil production in the 4 major US shale oil basins. You can see the total oil production from 47602 selected horizontal wells, in the 4 most prolific US shale oil basins, that started flowing since 2003, up until March 2016. Total oil production from these wells reached 5.0 Gbo (with an average gas-to-oil ratio of 3.4).

As I include now all horizontal shale (or better said, “LTO” (Liquid Tight Oil)) wells in Texas, also the ones in gas leases, the total oil (incl. condensate) production shown in this update is much larger than in my previous US post. Because of the recent additions to my database in the past few months, I belief the presentation contains now the individual production profiles of horizontal LTO wells that together produced almost 90% of total LTO production in the US, and more than 50% of onshore oil production in the lower 48 states.

In the Well Quality tab, you will find a few more formations being present now, such as Granite Wash, and Austin Chalk, both in Texas. The first tab (“Location of the shale oil basins”) will show you where all these wells are located.

I normally show the total oil production graph with production grouped by the year in which the wells started production. However, just this once, the default is set such that all production is shown by the quarter in which the wells started flowing. This causes the chart to be a little more overwhelming, but because of the finer granularity, the underlying decline of the wells is better visible now. You can change the setting with the “Group production by” selection.

The “well quality” tab shows that recent wells produce a little more early one, but that after 1-2 years on production, the average recent well performs very similar as earlier wells. Of course, there are major differences per basin/operator etc., and this can be explored with the filters and selections.

On the “well status” tab you can find the status, and production levels, of all wells, over time. Note that I don’t have “spud” and “plugged” info for wells in Texas. If you set the filter to show only “spud” wells, you can see that at the end of March, outside Texas, a total of 1859 wells were spudded (but not yet producing). If you want to see the number of wells brought online, you can set the selection to “first flow”; you will then see how the monthly number of newly producing horizontal wells dropped from over over 1100 by the end of 2014, to just over 300 in the last few months. This was a major drop, but less than the drop in rig count.

Coming Thursday I plan a post on gas production in the Marcellus basin, in Pennsylvania. After that I aim to make a post on how I expect the production from legacy LTO wells to unfold over the coming 2 decades.


Production data is subject to revisions, especially for the last few months in Texas. For this presentation, I used data gathered from the following sources:

  • DMR of North Dakota
  • Colorado OGCC
  • Texas RRC. Well profiles are estimated from well status & lease production data, as individual well production data is not provided.
  • OCD in New Mexico
  • BOGC of Montana


The above presentation has many interactive features:

  • You can click through the blocks on the top to see the slides.
  • Each slide has filters that can be set, e.g. to select individual or groups of operators. You can first click “all” to deselect all items. You have to click the “apply” button at the bottom to enforce the changes. After that, click anywhere on the presentation.
  • Tooltips are shown by just hovering the mouse over parts of the presentation.
  • You can move the map around, and zoom in/out.
  • By clicking on the legend you can highlight selected items, and include or exclude categories.
  • Note that filters have to be set for each tab separately.
  • The operator who currently owns the well is designated by “operator (current)”. The operator who operated a well in a past month is designated by “operator (actual)”. This distinction is useful when the ownership of a well changed over time.
  • If you have any questions on how to use the interactivity, or how to analyze specific questions, please don’t hesitate to ask.