This interactive presentation contains the latest oil & gas production data from 19,780 horizontal wells in the Eagle Ford region (TRRC districts 1-4), that started producing since 2010, through October 2017.
The Eagle Ford recovered a little further in October from the impact of Harvey in August, to over 1.06 million barrels of oil per day.
Unfortunately the quality of the Texas RRC data has deteriorated in recent months. There are numerous wells that started producing in the 2nd half of last year, but which still are not yet reported on the lease, or on the oil proration schedule. The result is that the production from these new wells (which is reported!) is now allocated to the other existing wells on these leases, and this causes the appearance that legacy decline has been reduced in recent months. This is especially the case for EOG. In the coming month I will look for additional ways on how to deal with these inconsistencies.
In the “Well quality” overview the production profiles for all these wells are available. There are not many basins where well productivity has changed so little in recent years as the Eagle Ford. That makes the new well results rather predictable.
The ‘top operators’ tab shows the operated output of the 5 largest producers. EOG is with more than double the production compared with the number 2 clearly in the lead.
The ‘Advanced Insights’ presentation is displayed below:
In this “Ultimate Recovery” overview the relationship between production rates, and cumulative production is revealed. Wells are grouped by the quarter in which production started. Recent wells peak higher, but follow very similar decline paths as earlier wells.
Wells that started in 2012 have now reached a production rate of about 20 barrels of oil per day, and are just shy of 150 thousand barrels cumulative production, on average. In addition, they produced roughly 0.6 Bcf of natural gas.
Using the ‘Productivity ranking’ overview, I found that of the large operators Devon and ConocoPhillips have the best well results, as measured by the average 1 or 2 year cumulative production.
Next week I plan to have posts on Pennsylvania, and all 10 covered states in the US.
I am on Twitter now, you can follow me here: https://twitter.com/ShaleProfile
Production data is subject to revisions, especially for the last few months. For this presentation, I used data gathered from the following sources:
- Texas RRC. Production data is provided on lease level. Individual well production data is estimated from a range of data sources, including regular well tests, and pending data reports.
The above presentations have many interactive features:
- You can click through the blocks on the top to see the slides.
- Each slide has filters that can be set, e.g. to select individual or groups of operators. You can first click “all” to deselect all items. You have to click the “apply” button at the bottom to enforce the changes. After that, click anywhere on the presentation.
- Tooltips are shown by just hovering the mouse over parts of the presentation.
- You can move the map around, and zoom in/out.
- By clicking on the legend you can highlight the related data.
- Note that filters have to be set for each tab separately.
- The operator who currently owns the well is designated by “operator (current)”. The operator who operated a well in a past month is designated by “operator (actual)”. This distinction is useful when the ownership of a well changed over time.
- If you have any questions on how to use the interactivity, or how to analyze specific questions, please don’t hesitate to ask.